The ZN046 is an adapter for renewing used keys in order for them to be programmed to another vehicle. It is an invaluable tool for all locksmiths, used with the ABPROG programmer.
Supported keys
- All types of keys with a PCF processor
(full supported list in the Compatibility tab, pinout available in the Technical specifications tab)
During the key renewal procedure, the adapter is soldered onto the PCB of the key and connected to the ABPROG programmer.
Note: This ABPROG function will allow you to use any HITAG Key with any vehicle that uses HITAG as long as the keys are from the same HITAG Generation.
After the soldering, the DB-25 male side of the add-on needs to be connected to the DB-25 female connector of the ABPROG ZN130.
After which, the male DB-15 part of the ZN130 needs to be connected to the female DB-15 connector on the AVDI.
The following photos will show you how the connection points on the key PCBs look like, so that you can proceed with the soldering.
All Porsche Hitag type of keys (new Porsche Keys) have the following soldering points
Audi BCM2 keys have the following soldering points
BMW F-Series 1st type Keys have the following soldering points
BMW F-Series 2nd type Keys have the following soldering points
BMW E-Series Keys have the following soldering points
Volvo Keys have the following soldering points
PSA keys have the following soldering points
The last added keys for renew are the following:
| Make | Key / part number | Frequency | Other |
|---|---|---|---|
| AUDI | 8T0959754 | 433MHz | R 233.453.111 02 |
| AUDI | 8T0959754A | 315MHz | R 233.453.111 02 |
| AUDI | 8T0959754F | 433MHz | K 233.453.111 02 |
| AUDI | 8T0959754F | 433MHz | K 233.453.111 05-06 |
| AUDI | 8T0959754F | 433MHz | K 233.453.111 05-06 |
| AUDI | 4G0959754G | 315MHz | K 233.453.111 05-06 |
| AUDI | 4H0959754G | 315MHz | K 233.453.111 05-06 |
| AUDI | 4H0959754K | 868MHz | K 233.453.111 05-06 |
| AUDI | 8T0959754 | 433MHz | R 233.453.111 05-06 |
| AUDI | 8T0959754D | 868MHz | R 233.453.111 05-06 |
| AUDI | 8T0959754G | 315MHz | K 233.453.111 05-06 |
| AUDI | 4G0959754BP | 315MHz | K 233.453.211 01-02 |
| AUDI | 4G0959754DB | 315MHz | K 233.453.211 01-02 |
| AUDI | 4G0959754DC | 315MHz | K 233.453.211 01-02 |
| AUDI | 4H0959754DA | 433MHz | K 233.453.211 01-02 |
| AUDI | 4H0959754DB | 315MHz | K 233.453.211 01-02 |
| AUDI | 8K0959754BR | 868MHz | K 233.453.211 01-02 |
| AUDI | 8K0959754D | 868MHz | K 233.453.211 01-02 |
| BMW F | HUF5662 | 315MHz | |
| BMW F | HUF5663 | 433MHz | |
| BMW F | HUF5767 | 433MHz | |
| BMW F | 5WK49662 | 433MHz | |
| BMW F | 5WK49663 | 315MHz | |
| BMW E | 5WK49127 | 315MHz | REMOTE |
| BMW E | 5WK49145 | 868MHz | KEYLESS |
| BMW E | 5WK49147 | 315MHz | KEYLESS |
| PORSCHE | 7PP959753BN | 434MHz | |
| PORSCHE | 7PP959753BQ | 315MHz | |
| PORSCHE | 7PP959753BM | 315MHz | |
| PORSCHE | 7PP959753BS | 434MHz | |
| VOLVO | 5WK49266 | 900MHz | |
| RANGE ROVER | 5E0U40247 | 434MHz | |
| MITSUBISHI | G8D 644M | ||
| PSA | 21676652 | ||
| PSA | E33CI002 | ||
| PSA | E25CI009 | ||
| PSA | E28CI01B | ||
| CHR JEEP DODGE | KOBOTO4A | ||
| BUICK | 13500224 (13584825) | 315MHz | |
| BUICK | 13500225 (13584825) | 315MHz | |
| OPEL | ASTRA J/INSIGNIA 13500234 | 433MHz | 3BTN |
| CHEVROLET | 13500319 (13584829) | 315MHz | 5BTN |
| CHEVROLET | 13575163 | 433MHz | 2BTN |
| CHEVROLET | 13575175 | 433MHz | 3BTN |
| CHEVROLET | 13500221 | 315MHz | |
| GM | 433MHz | KEYLESS 5BTN | |
| CADILLAC | NBG009768T | 315MHz | 5BTN KEYLESS |
Note: If a wiring diagram is missing in the software, please send an email to support@abrites.com together with your AVDI ID and a picture of the key you want to renew with its product version.
The following photos will show you how a soldered PCB looks like. The Example is of a BMW F-Series
HUF Key PCB
You can connect the adapter to the ABPROG adapter to AVDI as shown in the picture below
Once the cables of the ABPROG Adapter are soldered to the PCB, the ABPROG software can be started.
Select the “PCF” Option from the “Select” menu and the PCB model you are about to renew. After the desired options are selected, you can click on “Program” to renew the key and make it virgin. Click on “Yes” to confirm the renewal process.
Once the procedure is completed, you will see the “KEY Write finished successfully message”. This means that the key is now renewed and made virgin. You can continue with programming the key to another car.
