Below is the procedure, which you must follow in order to program new keys. We give an example for programming 2 keys:

1. Press the button “Program Keys”.

2. Insert the first valid key into the ignition and turn the ignition ON for at least 3 seconds - but no longer than 15 seconds.

Turn the ignition OFF and remove the first key.

3. Insert the second valid key and switch the ignition ON within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash.

Turn the ignition OFF and remove the second key.

4. Insert a blank Sentry Key into the ignition and switch the ignition ON within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, and turn ON for 3 seconds; then turn OFF.

The new Sentry Key has been programmed. The Remote Keyless Entry (RKE) transmitter will also be programmed during this procedure.

You can repeat this process to program up to a total of 8 keys.