This procedure requires ZN085 ABRITES RH850/V850 Programmer.
- The process of key programming begins with reading the vehicle’s BCM unit, using the ZN085 Programmer to extract the PIN > Open RH850/V850 software > Select Fiat BCM R7F701057.
Wiring diagram available in the software.
Once unit is read with ZN085 RH850 programmer, reinstall the unit back in the vehicle and proceed with the FCA Online software.
Important : CB012 - Direct CAN-BUS Connection Cable Set is required to establish connection to the internal CAN wires. You can intercept the internal CAN bus behind one of the connectors located near the BCM. The white-green wire from the vehicle’s harness is CAN-H (connected to the red connector of CB012), and the brown wire is CAN-L (connected to the blue connector of CB012).
The procedure is user-friendly and fully guided.
Please follow the instructions of the software strictly.
Select the Key learning menu > select the Megamos AES option.
The FCA Online will obtain the PIN automatically from our server and all you need to do is complete the procedure using the ZN103 ProTag Programmer and a compatible virgin key.
