9.2.1 Resolving the U2300 DTC in Ford/Mazda cars
- Open the ABS Unit and check if the DTC is present:
- Enter the “Service Functions” menu:
3.Enter the “Allow Central Configuration data parameter (CDP) Learning Menu
- Execute the “Reset ECU Central Configuration State/Data to Not Configured” function
9.3 Body Control Module (BCM)
9.3.1 Set Vehicle Power Mode
This application enables the setting of the vehicle power mode.
9.4 Restraints Control Module ( RCM )
9.4.1 Clear Restraint Control Module (RCM) Crash Data Memory
This routine will clear the crash data memory in the Restraints Control Module.
9.4.2 Restraints Control Module (RCM) Module Central Car Configuration (CCC) Update
Carry this procedure out if RCM module has been replaced
9.4.3 Tyre pressure measurement system sensors
Ford Focus and C-Max very often have an issue with the Tyre pressure measurement system sensors that get defective and display an error. There are different types of sensors and people often use a 2nd set of tyres that have no sensors. The photo below shows the error on the dash on a 2016 Focus:
The issue does not affect the overall driveability of the car, but according to the European regulations, all cars must have these sensors. It is up to the owner of the vehicle whether he will fix the error with replacing the sensors or put tyres without the sensors and clearing the warning.
The function requires the user to enter the CenralCarConfiguration menu and set the parameter value to 100. The module in the list is named “Tyre pressure mode system”.
9.4.4 Passenger Air Bag Deactivation (PAD) Switch Activation
The following procedure will activate/deactivate the passenger air bag switch.