Procedure has the following requirements to start

• Original unit in the vehicle.

Connection by OBDII for reading (you can also read with CB034 or via ABProg - check legacy procedure)

Read and save FBS data procedure

1. Connect to the vehicle - In the vehicle by OBDII for reading

2. Open the Mercedes FBS4 software

3. Select DSM

4. Press “Info” button to establish connection

5. Press “Save” button to read and save the FBS data

Personalization procedure

1. Install the donor unit in the vehicle

2. Open the Mercedes FBS4 software and select DSM

3. Press “Info” button to establish connection

4. Set the unit to “Virgin” state trough the dedicated button.

(You can proceed working in the vehicle via OBDII and internal CAN connection with CB012)

5. Press “Personalize” and select the file with the saved FBS data from the original DSM.

6. Software would ask you to turn IGN OFF and ON to finalize the procedure

7. Set the VIN