WIKI

Connection in the vehicle (using Distribution box)

  1. Connect ZN151 Distribution Box between AVDI and CB100/CB106 OBD-II cable

  2. Connect the CB100/CB106 OBD-II to the OBD-II port of the vehicle

  3. Connect AVDI to PC through CB104 USB A-B cable

  4. Use a needle from the ZN151 set to puncture the LIN (K-line) going to the ELV and connect to it (or to the LIN cable of the EZS/EIS (yellow/green))

  5. Connect the needle to the K7 socket of the ZN151 Distribution box

Connection in the vehicle (using CB026)

  1. Connect CB026 between AVDI and CB100/CB106 OBD-II cable

  2. Connect the OBDII cable (CB100/CB106) to the OBD port of the vehicle

  3. Connect AVDI to PC through CB104 USB A-B cable

  4. Use the needle from CB026 and connect LIN of ESL (or LIN of EZS(yellow/green)) to the green wire of CB026

Connection on bench (using ZN151 Distribution box)

  1. Connect ZN151 Distribution Box to AVDI

  2. Connect AVDI to PC through CB104 USB A-B cable

  3. Connect ZN151 distribution box to an external power supply using the B+ and GND sockets

  4. Connect B+, GND and LIN of the ESL (ELV) to the B+, GND and K7 socket of the ZN151 Distribution box

Connection on bench (using CB026)

  1. Connect CB026 to AVDI

  2. Connect AVDI to PC through CB104 USB A-B cable

  3. Connect 1A power supply to the power supply connector of CB026

  4. Connect B+, GND, LIN of ESL to B+, GND, green wire of CB026