With this function you can program immobilizers with the use of the Transponder programming device from Abrites and directly use them in the vehicle.

Attention: For all vehicle models, except SMART the transponder should be PCF 7935. For SMART vehicles the transponder must be PCF7936 and it should be configured to be in Cipher mode. This change can be done by changing the first byte in the Config page of the Hitag transponder to 0E (in Password mode this byte is set to 06).

For Mercedes ML (W163) you need to learn the transponder after you have programmed it. You can do this by using the “Immobilizer” special function. Also, for SMART vehicles you should learn the key by using the “SMART Key Teach-In” Special Function.

For C, E and G Class the transponders are self-learning. This means they can be used in the car right after they have been programmed.