WIKI

The key programming function currently works by CAN. Please, see below the supported vehicles. In the next versions we will add more vehicles to this list FREE for all customers who own the key learning function. We also plan to support vehicles with KLine interface. Keys can be programmed when the pin code of the vehicle is known. The Mitsubishi diagnostics has a database of default pin codes. The pin code can be changed with the Mitsubishi diagnostics. If the pin code is changed - next time when a key is programmed the new pin code should be used.

Attention: L200 models, which are produced in Mexico after year 2010 do not use the default PIN code. Instead, each L200 car has its own PIN code.

Attention: most Mitsubishi Grandis vehicles produced after year 2006 are diagnosed on CAN, but there are some which are diagnosed on K-Line. The K-Line vehicles are not supported yet.

When you select this special function the following screens appear, where you have to select the vehicle model:

Mitsubishi
Mitsubishi

At this moment you must choose the desired functionality.

After you are ready with the selection you must press the “Next” button. The following screens appear:

Mitsubishi
Mitsubishi

You can now enter the „New Chassis Number/VIN“, enter the PIN code and press „Next“

Mitsubishi
Mitsubishi
Mitsubishi
Mitsubishi

After the key programming is successful, you will see the following screen windows

Mitsubishi
Mitsubishi

The PIN code of the vehicle will be automatically generated once the procedure is started. Before proceeding with the key programming function, you should make sure that you are using the correct transponder chip. The transponder in the key should be HITAG (PCF7936). It should be configured to work in Password Mode. The transponder can be configured by using the “Tag Key Tool” software.

Mitsubishi

After the transponder has been pre-programmed correctly, you may click the buttons “Program a Key” or “Erase Keys”.


Programming Keys

It is important to note that if you see a message “Password Incorrect”, or “PIN Code could not be verified” this probably means that the PIN code is incorrect. You should not try to use this PIN more than 3 times, because the immobilizer will get locked. If the immobilizer gets locked, you must wait with Ignition ON for 15-30 minutes and then redo the procedure.

In the Appendix you can find a detailed explanation of the smart key (fast system) key programming procedure.