This function is dedicated to reading, saving and updating the engine control unit (ECU)’s Configuration data and flash. It allows for the PIN code to be read, the clusters to be calibrated as well as other funcions – IMMO OFF and after sales preparation of the unit – enabling it to be used in another vehicle. The service lists of the ECU can also be updated using this function.

Reading the Flash of the ECU is also available through this function. It can be used to read, save and update the flash by on board diagnostics (OBD).

This option can be very useful for tuning purposes as there are many models of ECUs supported, including EDC type of ECUs as well as SID ones.

Visualizing and resetting of the error history of the BSI and ECU is available through the main diagnostic menu.