When trying to connect to the device over K-LINE the “Abrites Diagnostics for VAG” will try to connect using one baud rate and if it does not succeed it will switch to another baud rate and attempt to connect once again. There are two baud rates currently in use- the 10472 and the 9600. Using the “10472\9600” and “9600\10472” in the dialogue box you could set the order in which these two baud rates will be used. If the “10472\9600” is selected then the software will try to connect over the K-LINE using the 10472 and if the connection is not successful it will switch to the 9600 and try to connect over it. If the “9600\10472” is selected the software will try to connect using a 9600 baud rate and if that proves unsuccessful it will switch to 10472 and make another attempt.

ATTENTION: Some of the devices using baud 9600 cannot be woken up if they have been tried with 10472. If you cannot connect to a device through K-LINE try to change the options so that the software tries to connect through 9600 first.