This special function allows the programming of keys to Immo III/IV vehicles with Megamos48 keys. Using this function, together with the ZN053 adapter and the ZN151 Distribution Box (both sold separately), keys can be programmed both when there is a working key and in ALL KEYS LOST situations.

The models coverage of the function is:

Immo III

• VW/Seat/Skoda CAN TP2.0 cars 2003-2008/2009 - Passat B6/CC 2003-2014

• Audi A3 until 2012

Immo IV

• VDO NEC 2008-2016/2017

• Magneti Marelli UDS - MM9/MM5

• Johnson Controls UDS

• Audi A4 2004-2008 (RB8 dashboard)

The screenshots below describe the procedure in details:

1. Open the “Key Learning” function

2. Choose “Emulate M48”

3. Choose the brand of the maker

Check preconditions and make sure they are met

5. Checking preconditions

6. Make sure you have AMS and internet

7. Reading data

8. Sending data to the server

9. Make sure ZN053 is close to the coil

10. Collecting module data

11. Calulation in progress

12. Put a new key in the PROTAG to program it