To learn the module to the vehicle it is necessary to have the Gateway EEPROM dump from the car on which you install this module.

You have the option to read the Gateway EEPROM dump manually with a programmer, or to read it by OBDII. Reading by OBDII normally takes about 3-4min, but requires a module reflash. If the gateway is once reflashed, further operations of the EEPROM reading do not need a reflash.

So the customer has the option to select whether they want to read the EEPROM dump by OBDII, or to read it with a programmer. If they select reading it by OBDII, then the next dialog displays the status of the operation.

Once the EEPROM data are read/loaded, the adaptation of the component protection is performed. Once this step is completed successfully, the module should be fully functional.