This function is dedicated to adapt the electronic steering lock (ELV) to the immobilizer (BCM2).

ATTENTION / It is possible to adapt ELV from one car to another with some constraints

• For A4/A5/Q5 – if you have the BCM2 (flash or immo data dump) from the car, from where you take the replacement ELV

• For A6/A7/A8/Touareg – if you have the BCM2 (flash or immo data dump) from the car, from where you take the replacement ELV, and a working key from the car, from where you take the replacement ELV

The procedure of adaptation is going on several steps:

Step 1 – it is necessary to select the car model from which you get the ELV. If the model is A4/A5/Q5, you will need only the BCM2 dump. If the model is A6/A7/A8/Touareg, you will need to read the working key (from car from where you take the ELV) in the programmer too. See picture below which shows the options when A4/A5/Q5 is selected.

• Step 2 – Read the BCM2 to which you want to adapt. Normally this is done by OBDII without user interaction

• Step 3 – Synchronize the BCM2 and the ELV. This steps also do not require and user interaction After completing these three steps, the ELV should work.