This special function is dedicated to key leaning for the vehicles equipped with the so called BCM2. Normally these are the A4/ A5/ Q5 vehicles produced after the year 2008/2009 and also A6/ A7 /A8 produced after 2010 and Touareg produced after 2010.

Once you start the special function you need to select the model.

The models are divided in three general groups:

• Audi A4/ A5/ Q5 – for this group it is not necessary to have a working key.

• Audi A6/ A7/ A8/ VW Touareg – this group requires to have a working key ( a key, purchased from a dealer is also an option). If you would like to learn a blank key it is necessary to place the working key in the programmer and press the “Read working key” option. If you plan on relearning existing keys or learn a key, purchased from a dealer (i.e. without programming blank keys) it is not necessary to press the “Read working key” option.

• Audi A6/ A7/ A8 with ALL KEYS LOST – this is special case where no one key is available and then the procedure is generally different. It is separately described below.

After the model selection is complete the procedure is identical for both groups

The special function offers the following options:

Making keys for these vehicles requires to read the BCM2 module. In general the procedure is split into three steps:

Step 1: Check BCM type.

Step 2: Read BCM ( either by OBDII or with an ABPROG)

Step 3: Key learning procedure ( making dealer keys or learning keys)