When this function is opened the “Abrites Diagnostics for VAG” tries to establish diagnostic with the instrument cluster using KWP2000 over TP2.0 or UDS.

If the session is established successfully the software will read the module’s identification and will try to automatically detect the instrument cluster type.

The following types can be detected:

• VDO/MM/Visteon -2007 (CAN TP2.0)

• VDO with NEC μC 2009+ (CAN UDS)

• JCI with NEC μC and 95320 EEPROM (CAN UDS)

• Magneti Marelli with 9S12 μC (CAN UDS)

• A8(4H)/A7(4G)/A6(4G)/Touareg(7P) with 95320 EEPROM (CAN UDS)

• DO based on MQB platform

If connection to the instrument cluster cannot be established or the instrument cluster’s type cannot be detected automatically you will see the following window:

In this window you can manually select the desired instrument cluster from the ones listed.

Note: If you would like to select the instrument cluster manually you need to disconnect your AVDI from the OBDII and open the “Instrument cluster CAN” special function.

If one of the above types of instrument cluster is automatically detected the “Abrites Diagnostics for VAG” will not open the corresponding function window.