The Volvo key programmer is dedicated to the following Volvo models using HITAG2 keys (keyless and non-keyless models):
-
V40 (2012-2019)
-
V60 and V60 Cross Country (2010-2018)
-
V70 (2007-2016)
-
S40 (2011+)
-
S60 and S60 Cross Country (2010-2018)
-
S80 (2006-2016)
-
XC60 (2008-2017)
-
XC70 (2007-2016)
It is a standalone key programming device that supports key addition and key programming in all keys lost situations. It is very usefull so that you do not spend hours in the car to wait for the CEM unit to be prepared. The hardware device is plugged directly into the car OBDII - no need for additional cables or connection to a computer. The device does not delete previously programmed keys and the procedure takes around 4-5 hours.
Here are the steps:
-
Insert the key programming device into the OBDII port.
-
The LED flashes slowly in green - it will start working.
-
After about 4-5 hours (non-keyless cars) and about 10 hours (keyless cars) the LED flashes quickly in green - the car is ready to accept a NEW key. The car could remain in this state until the next day.
-
The new key has to be inserted into the key slot.
The LED lights up in a constant green color - the key is suitable for the car and successfully programmed.
Supported keys are the keys that are compatible with the vehicle you are working with . As long as you have the correct key, there should be no problem with the procedure.
