What the ZN130 ABPROG programmer is for

The ZN130 ABPROG Programmer is a set of devices, designed to assist with many procedures, which require work on bench with multiple units in the vehicle.

Main functionalities

• Read, write and erase SPI, Microwire and I2C memories

• Read, write and erase memory of the FEM/BDC without removing it

• Read and write Bosch EDC16 units (MPC)

• Reading, writing, and erasing of NEC MCUs from Mercedes-Benz IR-keys

• Renew HITAG 2 type keys

• Reading and writing NEC V850 in different modules

• Reading EWS masks

ABProg should be used with ABRITES software produced by Abrites Ltd.

ABRITES is a trade mark of Abrites Ltd.

Required equipment

• Abrites AVDI interface
• ZN130 - ABPROG set
• A Windows PC meeting the System Requirements

Important notes

• ABPROG is a bench tool. Most of what it does happens with the module or the key PCB in your hand, not over OBD-II.
• Which adapter you need depends entirely on the target: memory type, MCU type and whether soldering is acceptable. See 3.2 Additional cables and adapters.