The ZN130 ABPROG bench programmer - EEPROM, MCU, NEC key and EWS work with the AVDI
The ZN130 ABPROG Programmer is a set of devices designed to assist with procedures that require work on the bench with units removed from - or opened up in - the vehicle. It reads, writes and erases SPI, Microwire and I2C memories, NEC MCUs from Mercedes-Benz IR keys, NEC V850 processors, EWS masks and more.
Software: this manual covers the Classic ABProg software. Many of the new and upcoming functionalities are found in the ABProg Upgraded software instead.
Required equipment
- Abrites AVDI interface
- ZN130 - ABPROG set (contains CB101, ZN031, ZN033, ZN035, ZN130 and the DB25 male connector)
- A Windows PC - Windows 10 64-bit or newer minimum, and a USB port supplying 100 mA / 5V +/- 5%
- The additional adapters for the job at hand (ZN032, ZN046, ZN055, ZN057, ZN058, ZN078, ZN086), sold separately
Contents
2.4 Software installation steps
2.5 Connection of the programmer to the interface
3.2 Additional cables and adapters for ABProg programmer
4. ZN032 – ABPROG NEC adapter with socket
6. ZN046 Key PCB Renewal Adapter
7. ZN055 - ABProg EWS3 Adapter
9. ZN078 - V850ES ADAPTER for ABPROG
11. Erasing Incremental EEPROM
12. Connect “ZN130-ABPROG” without “ZN031-M35XXX/SPI/I2C adapter”
13. Read SSID, Erasing and Programming of NEC Key for Mercedes
14. Hash reading without password from the EZS via IR. Password reading from NEC MCUs version 57
14.1 EZS hash reading through IR
14.2 NEC MCU version 57 password reading
15. ZN086 - MC9S12 ADAPTER for ABPROG