This connector is used if you do not own a particular adapter used with the ABProg, thus, you will be able to make your own adapter as per the task required.
Here is how to use the DB25 adapter as some of the additional adapters intended to work with ABProg programmer:
ZN046 PIN OUT
| Pin | Signal | Wire |
|---|---|---|
| PIN 1 | Red | |
| PIN 2 | Red | |
| PIN 3 | Red | |
| PIN 4 | Red | |
| PIN 5 | RX | Green |
| PIN 6 | TX* | White |
| PIN 14 | GND | Black |
38K resistor between PIN 6 and PIN 14
ZN058 PIN OUT
| Pin | Signal | Wire |
|---|---|---|
| PIN 5 | RX* | Purple* |
| PIN 6 | TX* | Purple* |
| PIN 13 | FLMD0 | White |
| PIN 14 | GND | Black |
| PIN 20 | +5V* | Red |
| PIN 25 | Reset | Green |
10K resistor between PIN 5 and PIN 20
1N4148 led between PIN 5 and PIN 6
ZN078 PIN OUT
| Pin | Signal | Wire |
|---|---|---|
| PIN 5 | RX* | Purple* |
| PIN 6 | TX* | Blue |
| PIN 13 | FLMD0 | White |
| PIN 14 | GND | Black |
| PIN 20 | +5V* | Red |
| PIN 25 | Reset | Green |
ZN086 MC9S12 ADAPTER for ABPROG
| Pin | Signal | Wire |
|---|---|---|
| PIN 14 | GND | Black |
| PIN 21 | +5v | Red |
| PIN 11 | RST | Yellow |
| PIN 19 | BKGD | Green |