6HP EGS Adaptation procedure

The 6HP EGS in the E-series is synchronized with the CAS only.
The adaptation procedure is a guided procedure which has to be performed from the following menu:
Keys and start synchronization > ISN codes> ISN in EGS .

The software will require to insert the ISN of the DME or to insert a working key in the PROTAG programmer to finish the adaptation procedure. Here are some screenshots from the procedure.

Important notes

• Do what the on-screen messages ask, when they ask it. One step of this procedure requires you to disconnect the battery, wait 10 seconds and reconnect before continuing.

• For the 8HP gearbox the binding is to the DME/DDE instead, and the method is different — see 11.2.