With the new 34.3 software version, you will be able to reset used keys, programmed to Hyundai/KIA vehicles.

Supported Transponder Types

• HITAG 3

• HITAG AES

• DST AES

• DST 80

The procedure is safe and user-friendly. It may take up to 70 min for HITAG 3 and HITAG AES, and about a minute for DST AES and DST 80. After that, you will be able to reprogram the key and use it on another vehicle.

This functionality is accessible for all users with the HK011 PIN and Key Manager license and an active AMS. ZN103 ProTag is also required.

It is recomended that the procedure is executed in the vehicle as suggested in the main screen. The software is guided and you just need to follow the on-screen messages.

Steps

1. From the main screen in the diagnostic menu select “Used Key Functions”

2. Select “Reset Used Key”

3. Follow the instructions provided on the screen

• ProTag Programmer is required

• Procedure may take up to 70 min for HITAG 3 or HITAG AES transponder types.

• Key needs to be inserted in the programmer when the software suggests is.

Below you can see screenshots from the procedure - it is a wizard (guided) software and you only need to follow the instructions on the screen: