NOTE! This functionality is old, you are now able to read the PIN Code by OBDII using the KIA Hyundai Online software!
In order to use the HK008 and HK009 software to perform PIN CODE READING, KEY PROGRAMMING and MODULE NEUTRALIZATION for the latest models of KIA and Hyundai vehicles (for example: KIA Cee’d generation CD, KIA Stinger, Hyundai Santa Fe generation TMA and other models, mostly produced after 2018+) the Abrites diagnostics for Hyundai/ KIA will require you to perform a connection to the internal CANBUS of the vehicle. Below you will find examples of such connections.
If such connection is required Abrites Diagnostics for Hyundai/ KIA will prompt you with a message.
The way to do this is to connect using your ZN041 or ZN151 distribution box to your AVDI and connect the distribution box to the OBD of the vehicle as well.
The next step is to connect the supplied (in the ZN041 and ZN151) needle pinch connectors to the internal CAN H and CAN L.
Once this is done you have to find the 3-11 (CAN H and CAN L) on the ZN041 or ZN151 and connect the CAN needle pinch connectors.
The Abrites Diagnostics for Hyundai/ KIA detects the need to connect to the internal CANBUS automatically and then prompts you to do so.
We advise you to be prepared with a ZN041 or ZN151 at all times when working on newer (2017+) KIA/ Hyundai vehicles so that if you need to connect you can be ready.
It is very important to keep both the OBD and the internal CAN pinch needle connectors connected as well.
Below you can see a few examples of where to find the internal “B-CAN” cables in Hyundai/Kia cars so you can connect:
- DRIVER IMS MODULE - under the driver’s seat (“S02-C” connector):
1.1 “S02-C” connector
- Right Side of HVAC case - IBU Module - “M04-B” Connector:
2.2 Right Side of HVAC case - “M04-B” IBU Connector
2.3 Right Side of HVAC case - “M04-B” IBU Connector
- ICU Module - Left side of crash pad “ICU-G Junction Block “ white connector:
3.1 ICU Module - connector pinout
- Wireless Charger Unit M63 - lower center of crash pad:
4.1 Wireless Charger Unit M63 - connector (12 white)
