The Abrites diagnostics for Mercedes/Maybach/Smart is a professional software for diagnostic of Mercedes-Benz, Maybach and Smart vehicles. It allows you to perform complete diagnostics of all 1995-present Mercedes-Benz models. It provides some unique functions, which are not supported by any other diagnostic tool.

Diagnostics is performed via the OBD-II connector or via the Mercedes-Benz proprietary 38-pin connector (only older cars, pre-2001). Since version 4.5 has beed added support for vehicles with a 14-Pin diagnostic link connector (these vehicles are accessible when for “Chassis Type” is selected “Trucks/Buses”). Our PC USB diagnostic interface supports over 26 multiplexed K-Lines and Mercedes-Benz diagnostics CAN-BUS interface (also known as CAN-D).

Standard diagnostic functions

Read identification: Software Part Number, Hardware Part Number, Supplier and so on.

• Read extended identification: VIN, Software Version, Bootloader Version, CAN Driver version and so on.

• Read fault codes.

• Clear fault codes.

• Device scan - search for all available control units in the car.

• Display of Actual Values (Live Data).

• Actuator Tests.

• Reset of control unit (Hardware Reset).

• Control unit adaptations - Date and Clock adjustment, read/write ID, read/write SCN and so on.

Special functions

Mileage Recalibration in Instrument Clusters and other control units (see the online manuals for comprehensive mileage recalibration).

• Read/Write Configuration (K-Line and CAN through the OBDII port and CAN through the plug of the dash).

• Airbag - read/write Configuration, clear crash data, lock/unlock the Airbag units to a car.

• Dump Tool - calculate mileage in dashboard, EZS (EIS), EDC-16, ESP; reset mileage values; make engine control modules virgin, clear crash data and so on.

• ECU - Read/Write Flash, Read/Write Configuration of Engine Control Units, Remove DPF/FAP.

• Transponder Generation - program transponders with the help of Abrites Transponder program mer.

• DAS 2 (FBS 2) Key generation - generation of key dumps by dump from IFZ.

• DAS 2A Programming of transponder keys - programming of transponder keys by Configuration dump from the WSP (Immobox).

• Immobilizer (DAS 2b) - Key Learning for Mercedes ML W163; Read/Write Full Configuration of AAM/EAM control modules; Learn radio code of transmitter keys; Deactivate/Reactivate keys.

• Program Smart Keys (DAS 3). The Mercedes Diagnostics software is capable of generating files for programming into the Configuration of infrared smart keys.

• Sprinter/Vito Start Error repair - generation of files for the WSP and ECU units to repair “Start Error”.

• Renew of 7-Gearbox (722.9) and Intelligent Servo Module (ISM) control units.

• TV/AUX activation/deactivation.

• Seatbelt warning activation/deactivation.

• Adaptations for SMART - Key Teach-in, Softouch activation/deactivation. Air Conditioning acti vation/deactivation, Reflash of some units and so on.

• CGW Explorer: Read/Write the Configuration of Central Gateway (CGW) under CAN. From here you can also view/change ASSYST service history records.

• ASSYST PLUS - Change service maintenance records history.

• Reverse warning activation/deactivation.

• Activation/deactivation of Speed warning for Gulf States.

Advanced functions

• Custom memory read/write

• Custom requests. With this advanced function the user can send requests to the electronic de vice.

Note: Depending on the version that you have purchased some of these functions may not be available in your software.