When replacing an electronic module within a vehicle be it a new module or a used one the calibration of this module is vital for the correct operation of this vehicle.

The first step is to connect to the vehicle, then select it and select the unit that is to be calibrated. The current value will then be displayed.

You will need to input the correct value and press the “Write” button.

The operation then completes successfully and the new value is updated.

Note: While writing the odometer of the Corsa C Instrument Panel, the trip button should be hold pressed. When the operation is completed with success, a manual reset of the instrument shall be performed, either by disconnecting a battery or by removing a fuse F3 for a few minutes.