WIKI

987 when adding a spare key

When you have a working key to the Porsche, you now can use the TA31 Extractor to read the data from the working key and add a spare one. You need to make sure to have a ProTag connected to the PC, internet connection and no more than 3 minutes time.

To do this, open the “Key Learning” special function and follow the on-screen instructions.

  1. Select the vehicle model you’re working on
Porsche
  1. Give Ignition ON with the original key and click on “Read transponder data from working key”.
Porsche
  1. Put the original key into the programmer
Porsche
  1. Put the TA31 into the programmer
Porsche
  1. Give ignition ON 32 times together with
Porsche
  1. Put TA31 into the programmer working key and TA31
Porsche
  1. Calculating...
Porsche
  1. Transponder data read successfully
Porsche

Once the transponder data is extracted, it will remain cached on the computer. However, you need to proceed with preparing the new key as dealer and re-learning the original key together with learning the new key to the car, choosing the desired option. In this case, we need to select the 2nd option (Use transponder data read from working key):

Porsche

Note: Protag, active AMS, internet connection and preparing the keys as dealer is needed for making the procedure.