This special function is dedicated to adapting a “second-hand” EZS-Kessy from one vehicle to another. To adapt the EZS-Kessy you need the existing PIN and CS of the used EZS-Kessy or the PIN and CS of its ECU. You can extract it by reading the EZS-Kessy with a programmer and saving a dump file on your PC which can later be loaded into the software. These PIN and CS will later give you access to the unit, allowing you to change the immo data and write the data you need. The screenshots below will show what the procedure looks like:

1. Reading the PowerClass, CS and PIN from the ECU

2. Enter “Immo Parts Adaptation” and select “EZS-Kessy”

3. You can load the donor EZS-Kessy dump if you have it

4. If you have the donor IMMO data you can enter it instead

5. Pressing “Read” after entering the data manually will display a prompt:

6. The procedure has completed the adaptation