This special function is dedicated to adapting used transmissions from one vehicle to another. To adapt the transmission you need the existing PIN and CS of the used gearbox. You can extract it by reading the EZS-Kessy or engine control unit from the donor car. Without having the PIN/CS of the transmission, you cannot adapt using this method. In that case you will need to apply the technique using EM003.
The below screenshots show what the procedure looks like:
- Select the ECU option from the “Immo Parts Adaptation”
- Autodetect the IMMO Data from the ECU and save it
- Enter “Immo Parts Adaptation” and select Transmission A6
- Either load a dump file or enter the donor TCU immo data
- Enter the ECU Power Class and continue
- Press “Update” after entering the desired IMMO Data
