Vehicle coverage: Subaru vehicles with a mechanical key (H-type key, DST-AES transponder) and a BCM unit. Maximum 4 keys.
Required equipment
- Abrites AVDI interface connected over OBDII
- Abrites Diagnostics for Subaru software
- For all keys lost: TA41 with a ProTag programmer, or a ZN066 adapter
Additional key
Additional Key programming is executed trough the "Immobilizer" menu of the main screen > "Key Registration" > the procedure is guided and you need to follow the instructions.
All keys lost
All Keys Lost requires you to first execute the "All Keys Lost" procedure and then perform key registration procedure either with TA41 or ZN066.
All keys lost procedure is started from "Immobilizer" special function > All Keys Lost and will ask for either a TA41 and a Protag programmer or a ZN066, and will prepare a key emulator.
After the emulator is prepared you will have to perform Key Registration procedure.
| Route | What it needs | Detail |
|---|---|---|
| TA41 + ProTag | A TA41 emulator and a ProTag programmer | 5.5.1 All keys lost using TA41 and PROTAG |
| ZN066 | A ZN066 adapter plus a blank key / TA41 / DST-AES transponder | 5.5.2 All keys lost using the ZN066 |
Important notes
- The TA41 stays locked to the vehicle and usually remains with the customer as a spare; the ZN066 is reusable across many vehicles but leaves nothing behind, so you must have a key to program.
- The Immobilizer special function is dedicated to vehicles with a mechanical key and either an Immobilizer or a BCM unit - its full function list is on the Immobilizer Special Function page.
- The smart-key equivalent of this page is 4.3 Smart key and smart system.