Diagnostics, keys, ECUs and modules on Renault and Dacia

The Abrites Diagnostics for Renault/Dacia goes from the everyday - scanning, fault codes, live data, actuator tests - to the work that needs the immobiliser: reading the PIN, learning keys and cards including the Abrites key cards, cluster calibration, reading and writing ECU configuration and flash on the bench, renewing a UCH, airbag, EPS or ESL, and calculating radio codes.

Required equipment

• Abrites AVDI interface
• A Windows PC, Windows 10 64-bit or newer, with an internet connection
• For Abrites key cards: the ProTag programmer (ZN103) and Abrites key cards
• For newer X95 immobilisers and the Clio IV / Captur handsfree module: ABProg
• For bench work on ECUs: an OBDII to DB9 Male adapter, and the ZN151 Distribution Box for the wiring
• For a key on a key-based car: a factory-new PCF7936 transponder

Some special functions have to be purchased separately. If one is missing from your menu, that is why.

Contents

1. Introduction

2. Getting Started

3. Standard Diagnostics

4. Advanced Diagnostics

4.1 PIN code reading and key learning

4.1.2-4.1.3 X95 based cars

4.1.4 Using Abrites key cards

4.2-4.3 Dump Tool and Change ID

4.4-4.5 PIN Calculator and Clio PIN by dump

4.6 Cluster calibration

4.7 ECU configuration data, flash and IMMO

4.8 EDC17 specific functions

4.9 Renewal

4.10 Radio Code

5. Connecting ECUs on bench with the ZN151 Distribution Box