• Important notes
• Copyright information
• Safety information

Table of contents

• 1. Introduction
• 2. Installation
• 3. Using the Abrites diagnostics for VAG Online
  • 3.1 General Diagnostics
  • 3.2 Basic settings
  • 3.3 Adaptations
  • 3.4 Long coding
• 4. Special Functions
  • 4.1 Special function “MMI functions”
  • 4.2 Special function “Wireless Carplay / Google Auto”
  • 4.3 Video in motion
  • 4.4 Special function “Unlock BCM2”
    • 4.4.1 Using the ZN080 set
    • 4.4.2 Using the CB016 - outdated and replaced by ZN080
  • 4.5 Special Function “Read CS on bench”
    • 4.5.1 PCR 2.1 read CS
    • 4.5.2 Simos 8.x read CS
    • 4.5.3 Simos 1x.xx read CS
    • 4.5.4 DCM6.2 read CS
    • 4.5.5 Read CS of AL551, DL501, DQxxx
  • 4.6 Guided Functions
  • 4.7 MLB Dashboard Mileage Calibration
  • 4.8 DSG Mileage Recalibration
  • 4.9 Service Intervals
  • 4.10 Programing
  • 4.11 Special Function “Dump Tool”
• 5. Key Learning
  • 5.1 VDO Immo 5C Key Learning Procedure for MQB Platform
  • 5.2 Immo 5C All Keys Lost Procedure (Hitag PRO Keys) for vehicles with VDO dash modules
• 6. MQB 5C/5D Immo Data Reading from NCF Processor
  • 6.1 Overview
  • 6.2 Immo Data Extraction
  • 6.3 Key Programming
  • 6.4 Module Replacement
• 7. VAG Immo V adaptation
  • 7.1 Supported modules
  • 7.2 Immo V adaptation of ECU/TCU/ELV
    • 7.2.1 Troubleshooting
  • 7.3 Immo V adaptation of an immobilizer module (Dashboard/BCM2)
    • 7.3.1 Troubleshooting
• 8. Appendixes
  • 8.1 MQB/MLB CAN blocker
  • 8.2 Update ABprog ZN080 set BCM2 unlock